把融化好的石蜡灌到已经制作好的石膏模具或硅胶模具里，等石蜡冷却后就成了蜡型了。 第五步：制壳 　　制壳和模具翻制一样分为两种：一种是小件或着复杂的我们应该选用精密铸造，所谓精密制作就是用精致石英砂一层一层吧制作好的蜡型包起来、然后再用高温把壳里面的石蜡烧净。另一种就是树脂砂箱制作，砂箱制作一般适用于简单的，平面浮雕，大铜钱，铜佛像的背面，等没有多大工艺的光面。 Pour the melted paraffin into a plaster mold or silicon mold that has been made, and when the paraffin cools, it becomes waxy. Step 5: shell shell making and mould making is divided into two kinds: one kind is small or the complex we should choose precision casting, precision production is made of a layer of a layer of fine quartz sand, wax type wrapped up, and then burn the net inside the shell with high temperature of paraffin. Is another kind of resin sand production, sand production generally suitable for simple, flat relief, the big copper, copper Buddha on the back, and there is not much process smooth. 第六步：铸造 Step 6: casting 高温把铜化成铜水灌注到做好的壳或砂箱里面。 The high temperature turns copper into copper water into a finished shell or sandbox. 第七步：打磨 　　 Step 7: polish 清冒口打磨。 Clean up your mouth. 第八步：拼接铸铜雕塑 Step 8: splicing cast bronze sculpture 把已经打磨好的铜雕拼在一起，成为一个完整的整体。这一步做完基本就能看出我们的铸铜雕塑大致样子了。 Put the polished bronze sculptures together and become a complete whole. This is a step through which you can see the general appearance of our cast bronze sculpture. 第九步：清理焊口 Step 9: clean up the electrode 把我们拼接好的铜雕焊接的部位都处理成跟我们的泥稿一摸一样。 The parts of the copper carvings we have spliced together are treated as if we were a clay manuscript. 第十步：表面作色 Step 10: surface color 我们的铜雕是反映什么时期的，古代的一般适合青铜色近代的一般适用于古铜色，现代就很多了,铸铜人物雕塑，有贴金的，也有镀金的，还有彩绘的。 Our bronze series reflects what the period of the ancient generally suitable for modern bronze generally applicable to tan, modern many, cast copper sculpture characters, gold, gold-plated, and coloured drawing or pattern.